Product ID:CGL 1310 RESIN EPOXY LAMINATING RESIN
MSDS Date:11/01/1989
FSC:8030
NIIN:00F027477
MSDS Number: BQZPH

CIBA-GEIGY CORP REN PLASTICS DIV

4917 DAWN AVE
EAST LANSING, MI 48823-5605
US

Emergency Phone: 800-888-8372

Info Phone: 517-351-5900

Preparer: PETER HENIGE

Cage: 02684

CIBA SPECIALTY CHEMICALS CORPORATION

EAST LANSING, MI 48823-5691 US

Telephone: 517-351-5900

Cage: 02684

CALCIUM CARBONATE, DOMOLITE, LIMESTONE, WHITING

CAS: 1317-65-3

RTECS: EV9580000

OSHA PEL 15 MG/CUM (DUST)

ACGIH TLV: 10 MG/CUM (DUST)

1,4-BUTANE DIGLYCIDYL ETHER, DIEPOXIDE

CAS: 2425-79-8

RTECS: EJ5100000

HYDRATED ALUMINA, ALUMINUM HYDROXIDE, ALUMINUM OXIDE

CAS: 21645-51-2

RTECS: BD0940000

OSHA PEL 15 MG/CUM (DUST)

ACGIH TLV: 2 MG/CUM (DUST)

BISPHENOL A DIGLYCIDYL ETHER RESIN, EPOXY RESIN,

CAS: 25068-38-6

RTECS: KD4380000

4,4'-METHYLENEBIS(N,N-DIGLYCIDYLANILINE) *93-1*

CAS: 28768-32-3

LD50 LC50 Mixture:ORAL LD50 (RAT): 1000 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: SEVERE IRRITATION &
SENSITIZATION. EYES: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: SEVERE IRRITATION, BURNS, & ALLERGIC
REACTIONS. EYES: IRRITATION.
Medical Cond Aggravated by Exposure:SENSITIVITY, SKIN & EYE CONDITIONS

First Aid:EYES: FLUSH IMMEDIATELY W/WATER FOR AT LEAST 15 MINS. SKIN:
WASH W/SOAP & WATER. INGESTION: IF CONSCIOUS, GIVE PLENTY OF WATER
TO DRINK. DON'T INDUCE VOMITING. INHALATION: REMOVE TO FRESH AIR.
GIVE OX YGEN &/OR ARTIFICIAL RESPIRATION, IF NEEDED. OBTAIN MEDICAL
ATTENTION IN ALL CASES. REFERRAL TO A PHYSICIAN IS RECOMMENDED IF
THERE IS ANY QUESTION ABOUT THE SERIOUSNESS OF ANY INJURY.

Flash Point Method:PMCC
Flash Point:242F
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:DECOMPOSITION & COMBUSTION PRODUCTS MAY
BE TOXIC.

Spill Release Procedures:REMOVE SPILLAGE BY ABSORBING IN ABSORBENT
MATERIAL. AVOID CONTACT.

Handling and Storage Precautions:NUISANCE DUST MAY BE GENERATED WHEN
SANDING OR SAWING CURED MATERIAL.
Other Precautions:AVOID CONTACT W/EYES, SKIN, OR CLOTHING. AVOID
PROLONGED OR REPEATED CONTACT W/SKIN.

Respiratory Protection:USE NIOSH-APPROVED ORGANIC VAPOR CARTRIDGE
RESPIRATOR WHEN VAPOR-MIST EXPOSURE IS LIKELY.
Ventilation:GENERAL MECHANICAL/LOCAL EXHAUST: REQUIRED
Protective Gloves:IMPERMEABLE
Eye Protection:SPLASH-PROOF CHEMICAL GOGGLES
Other Protective Equipment:PROTECTIVE CLOTHING
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
KEY1:C4. SEE NSN 8030-00-F01-5580 FOR PART 2 OF KIT, P/N RP 1510,
HARDENER.

HCC:C2
Spec Gravity:1.25-1.30
Solubility in Water:SLIGHT
Appearance and Odor:BLACK LIQUID.
Percent Volatiles by Volume:NEGLI

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS, & BASES
Stability Condition to Avoid:EXCESSIVE HEAT FOR PROLONGED PERIODS OF
TIME.
Hazardous Decomposition Products:TOXIC MATERIALS, SUCH AS CO2, CO

Waste Disposal Methods:CONSULT QUALIFIED LOCAL OR CORPORATE PERSONNEL
FOR METHOD THAT WILL COMPLY W/LOCAL, STATE, & FEDERAL HEALTH &
ENVIRONMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.